page_banner

Large Stock 254*146 Cold Rolled A36 S235 IPE Flange Profile Galvanised Steel I Beam

Large Stock 254*146 Cold Rolled A36 S235 IPE Flange Profile Galvanised Steel I Beam

Short Description:

Galvanized I-beam is a kind of steel used in construction. Hot-dip galvanizing refers to a surface anti-corrosion process made by immersing high-quality low-carbon structural steel or low-alloy structural steel in molten zinc at about 500°C. Due to the advantages of low cost, convenient construction and good durability, it is widely used in the field of construction steel structure engineering.


Product Detail

Product Tags

Product Detail

Galvanized I-beam is a kind of steel used in construction. Hot-dip galvanizing refers to a surface anti-corrosion process made by immersing high-quality low-carbon structural steel or low-alloy structural steel in molten zinc at about 500°C. Due to the advantages of low cost, convenient construction and good durability, it is widely used in the field of construction steel structure engineering.

Hot-dip galvanizing is an effective metal anti-corrosion method, which is mainly used in metal structure facilities in various industries. The main purpose of pretreatment of the workpiece by hot dipping is to remove grease and other dirt and rust on the surface of the workpiece; secondly, to form a uniform and complete chromium-rich oxide protective film on the surface of the workpiece; thirdly, to improve the corrosion resistance of the workpiece .

Main Application

Features

1. High compressive strength: it can be used as a load-bearing support.

2. The installation is simple and quick.

3. Beautiful appearance.

4. Long service life.

5. The product size is accurate.

6. Low price, good comprehensive benefits and strong adaptability.

Application

Galvanized I-beams are widely used in various building structures, bridges, vehicles, supports, machinery and other fields.

Galvanized I-beam hot-dip galvanizing purposes: 1 uniform hot-dip galvanized surface; 2 reduce the thickness of hot-dip galvanized surface. Blowing hot-dip galvanizing can accelerate the production of hot-dip galvanized zinc non-ferrous metal layer. The blow-plated prefabricated components can achieve a thickness of more than 7μ, and the service life of the application can reach 25 years. The general thickness of hot-dip galvanizing is 7---15μ to form a hot-dip galvanized non-ferrous metal layer. It can reach 30μ without blowing, and the hot-dip galvanized non-ferrous metal layer is only 7---15μ thick.

The hot-dip galvanized I-beam has the characteristics of smooth surface, uniform zinc layer, no missing plating, no dripping, strong adhesion, and strong corrosion resistance. In the urban environment, the hot-dip galvanized I-beam Hot-dip galvanized anti-rust treatment can last for more than 50 years without repair.

application
application1

Parameters

Product name I-Beam
Grade Q235B, SS400, ST37, SS41, A36 etc
Type GB Standard, European Standard
Length Standard 6m and 12m or as customer requirement
Technique Hot Rolled
Application Wide used in various building structures, bridges, vehicles, bracker, machinery etc.

Samples

sample
sample1
sample2

Delivery

delivery
delivery1
delivery2

FAQ

1. What are your prices?

Our prices are subject to change depending on supply and other market factors.    We will send you an updated price list after your company contact

us for further information.

2.   Do you have a minimum order quantity?

Yes, we require all international orders to have an ongoing minimum order quantity.    If you are looking to resell but in much smaller quantities, we recommend you check out our website

3.   Can you supply the relevant documentation?

Yes, we can provide most documentation including Certificates of Analysis / Conformance;    Insurance;    Origin, and other export documents where required.

4.   What is the average lead time?

For samples, the lead time is about 7 days.    For mass production, the lead time is 5-20 days after receiving the deposit payment.    The lead times become effective when

(1) we have received your deposit, and (2) we have your final approval for your products.    If our lead times do not work with your deadline, please go over your requirements with your sale.    In all cases we will try to accommodate your needs.    In most cases we are able to do so.

5.   What kinds of payment methods do you accept?

30% in advance by T/T, 70% will be before shippment basic on FOB;     30% in advance by T/T, 70% against the copy of BL basic on CIF.


  • Previous:
  • Next:

  • Write your message here and send it to us