Factory Supply Abrasion Resistant / Wear Resistant Steel Plate
What is Abrasion Resistant Steel?
Wear-resistant plate is a special steel plate with high wear resistance. It is mainly achieved by adding alloy elements such as chromium, manganese, molybdenum, nickel, and vanadium to the steel, or using special rolling and heat treatment processes (such as quenching + tempering) to form a hard structure (such as martensite, bainite, etc.) on the surface and inside the steel plate, thus having the ability to resist wear (such as impact wear, sliding wear, abrasive wear, etc.). It is widely used in fields with severe wear such as mining, construction, engineering machinery, metallurgy, and electric power.
| Grade Designation | Characteristics | Applications |
| AR200 | Moderate hardness and toughness | Conveyor liners, wear plates |
| AR400 | High hardness, excellent abrasion resistance | Bucket liners, crushers, hoppers |
| AR450 | Very high hardness, superior abrasion resistance | Dump truck bodies, chute liners |
| AR500 | Extreme hardness, exceptional wear resistance | Bulldozer blades, shooting targets |
| AR600 | Ultra-high hardness, superior wear resistance | Excavator buckets, heavy-duty machinery |
| AR300 | Good hardness and toughness | Liner plates, wear parts |
| AR550 | Very high hardness, exceptional wear resistance | Mining equipment, rock crushers |
| AR650 | Ultra-high hardness, superior abrasion resistance | Cement industry, heavy-duty machinery |
| AR700 | Extreme hardness, excellent impact resistance | Material handling, recycling equipment |
| AR900 | Ultra-high hardness, maximum wear resistance | Cutting edges, severe wear environments |
AR Steel Properties
Properties of AR steel plate, sheet & coil vary depending on the grade. The lower the grade, such as AR400, the more formable the steel is. The higher the grade, like AR500, the harder the steel is. AR450 is right in the middle, denoting a “sweet spot” between hardness and formability. You can view more information about each grade of steel using the table below.
| Grade | Hardness Brinell | |
| AR200 | 170-250 BHN | Learn More |
| AR400 | 360-444 BHN | Learn More |
| AR450 | 420-470 BHN | Learn More |
| AR500 | 477-534 BHN | Learn More |
In addition to the listed grades, ASTM Wear Resistant Steel plates also include other grades such as AR250, AR300, AR360, AR450, AR550, etc. We offer a wide range of products, if you need, please feel free to contact us.
| Steel Grade | Thickness mm |
Grade Level | WNM Steel Chemical Composition Wt% | ||||||||
| C | Si | Mn | P | S | Mo | Cr | Ni | B | |||
| Max | |||||||||||
| NM 360 | ≤50 | A-E、L | 0.20 | 0.60 | 160 | 0.025 | 0.015 | 0.50 | 1.00 | 0.80 | 0.004 |
| 51-100 | A、B | 0.25 | 0.60 | 160 | 0.020 | 0.010 | 0.50 | 1.20 | 1.00 | 0.004 | |
| NM 400 | ≤50 | A-E | 0.21 | 0.60 | 1.60 | 0.025 | 0.015 | 0.50 | 1.00 | 0.80 | 0.004 |
| 51-100 | A、B | 0.26 | 0.60 | 1.60 | 0.020 | 0.010 | 0.50 | 1.20 | 1.00 | 0.004 | |
| NM 450 | ≤80 | A-D | 0.26 | 0.70 | 1.60 | 0.025 | 0.015 | 0.50 | 1.50 | 100 | 0.004 |
| NM 500 | ≤80 | A-D | 0.30 | 0.70 | 1.60 | 0.025 | 0.015 | 0.50 | 1.50 | 1.00 | 0.004 |
| Thickness | 0.4-80mm | 0.015"-3.14"inch |
| Width | 100-3500mm | 3.93"-137"inch |
| Length | 1-18m | 39"-708"inch |
| Surface | Oiled,Black Painted,Shot Blasted,Hot Dipped Galvanized,Checkered,etc. | |
| Process | Cutting,Bending,Polishing,etc. | |
| Common Grades | NM260,NM300,NM350,NM400,NM450,NM500,NM550,NM600,etc. | |
| Application | Some common applicationsisused to help resist material wear and tear include:Conveyors,Buckets,Dumpliners,Constructionattachments,such as those used on bulldozers and excavators,Grates,Chutes,Hoppers,etc. |
|
| *Here are normal size and standard,special requirements please contact us | ||
|
Items
|
Hickness /mm |
| Hardox HiTuf | 10-170mm |
| Hardox HITemp | 4.1-59.9mm |
| Hardox400 | 3.2-170mm |
| Hardox450 | 3.2-170mm |
| Hardox500 | 3.2-159.9mm |
| Hardox500Tuf | 3.2-40mm |
| Hardox550 | 8.0-89.9mm |
| Hardox600 | 8.0-89.9mm |
Main Brands and Models
HARDOX Wear-resistant Steel Plate: produced by Swedish Steel Oxlund Co., Ltd., divided into HARDOX 400, 450, 500, 550, 600 and HiTuf according to hardness grade.
JFE EVERHARD Wear-resistant Steel Plate: JFE Steel has been the first to produce and sell it since 1955. The product lineup is divided into 9 categories, including 5 standard series and 3 high-toughness series that can guarantee low-temperature toughness at -40℃.
Domestic Wear-resistant Steel Plates: such as NM360, BHNM400, BHNM450, BHNM500, BHNM550, BHNM600, BHNM650, NR360, NR400, B-HARD360, HARD400, etc., produced in Baohua, Wugang, Nangang, Baosteel, Wuhan Iron and Steel, Laiwu Steel, etc.
The advantages of wear-resistant steel plates are numerous and make them a preferred choice for applications where abrasion and wear are significant concerns. Some key advantages include:
Exceptional Wear Resistance: Wear-resistant steel plates are specifically designed to withstand abrasion, erosion, and wear, providing extended service life for equipment and machinery in harsh operating environments.
High Hardness: These plates exhibit high hardness levels, typically measured on the Rockwell scale (HRC), which enables them to resist surface wear and deformation, even under extreme conditions.
Impact Resistance: In addition to wear resistance, wear-resistant steel plates offer excellent impact resistance, making them suitable for applications where equipment is subjected to both abrasive and high-impact conditions.
Extended Equipment Lifespan: By protecting against wear and abrasion, these plates help to extend the lifespan of machinery and equipment, reducing the frequency of maintenance, repair, and replacement.
Improved Performance: The use of wear-resistant steel plates can enhance the performance and productivity of equipment by minimizing downtime and maintenance requirements, leading to increased operational efficiency.
Versatility: Wear-resistant steel plates are available in various thicknesses and dimensions, making them suitable for a wide range of applications across different industries, from mining and construction to material handling and recycling.
Cost-Effective Solution: While the initial investment in wear-resistant steel plates may be higher than standard steel, the long-term cost savings due to reduced maintenance and replacement costs make them a cost-effective solution in the long run.
Customization Options: These plates can be customized to meet specific application requirements, including different hardness levels, dimensions, and surface treatments, ensuring they are tailored to the needs of the equipment and operating conditions.
Wear-resistant steel plates find applications in a wide range of industries and equipment where abrasion, impact, and wear are significant concerns. Some common applications include:
Mining Machinery: Liners and guards used for crushers, screens, conveyor belts and other equipment to resist the impact and wear of ore.
Cement Building Materials: Liners used for ball mills, vertical mills and other equipment to improve equipment wear resistance and reduce downtime.
Electric Power Metallurgy: Coal powder pipelines, dust collectors, fan blades in thermal power plants, hoppers, feed troughs, linings and other components of blast furnaces in steel smelters will be used to ensure stable operation of equipment.
Coal Chemical Industry: Prevent materials from wearing equipment in coal bunkers, chutes, conveyors and other equipment.
Engineering Machinery: Buckets, track shoes and other components of excavators, loaders, bulldozers, etc. are often used to improve operating efficiency and equipment life.
Note:
1.Free sampling, 100% after-sales quality assurance, Support any payment method;
2.All other specifications of round carbon steel pipes are available according to your requirement (OEM&ODM)! Factory price you will get from ROYAL GROUP.
Hot rolling is a mill process which involves rolling the steel at a high temperature
which is above the steel’s recrystallization temperature.
Packaging: Wear-resistant steel plates must be packaged in accordance with national standards and industry specifications to ensure product safety and stability. Common packaging methods include wooden crates, wooden pallets, and steel strapping. During the packaging process, ensure that the packaging material is securely fastened and reinforced to prevent displacement or damage during transportation.
Transportation: Express (Sample Delivery), Air, Rail, Land, Sea shipping (FCL or LCL or Bulk)
Entertaining customer
We receive Chinese agents from customers all over the world to visit our company, every customer is full of confidence and trust in our enterprise.
Q: Are u a manufacturer?
A: Yes, we are spiral steel tube manufacturer locates in Daqiuzhuang village, Tianjin city, China
Q: Can I have a trial order only several tons?
A: Of course. We can ship the cargo for u with LCL serivece.(Less container load)
Q: If sample free?
A: Sample free, but the buyer pays for the freight.
Q: Are you gold supplier and do trade assurance?
A: We 13years gold supplier and accept trade assurance.
-
China Factory High Carbon Steel 50CrVA Spring S...
-
Direct Deal Z Type Steel Sheet Pile for Archite...
-
Steel Structure Metal Shed Steel Building Prefa...
-
1mm 3mm 6mm 10mm 20mm Q235 Carbon Steel Plates ...
-
High Quailty 20Mn2 40Mn2 50Mn2 Hot Rolled Black...
-
High Strength Structural Carbon SteelQ235 ASTM ...
