China Factory Manufacture High Quality 2024 7075 6036-T6 Aluminum Round Bar
|
Product Name |
ASTM B211,ASTM B221, ASTM B531 ETC | |
|
Material |
Aluminum, aluminum alloy
2000 Series: 2014A, 2014, 2017, 2024, 2219, 2017, 2017A, 2218 5000 Series: 5052, 5056, 5154, 5015, 5082, 5754, 5456, 5086, 5182 6000 Series: 6061, 6060, 6063, 6070, 6181, 6082 7000 Series: 7005, 7020, 7022, 7050, 7075 8000 Series: 8011, 8090 |
|
|
Processing |
Extrusion | |
|
Shape |
Round, Square, Hex, etc. | |
|
Size |
Diameter (mm) | Length (mm) |
| 5mm-50mm | 1000mm-6000mm | |
| 50mm-650mm | 500mm-6000mm | |
|
Packing |
Standard export packingPlastic bag or waterproof paperWooden case (custom suffocating free)Pallet | |
|
Property |
Aluminum has a special chemical physical characteristic, not only light weight, firm texture, but have good ductility, electrical conductivity, thermal conductivity, heat resistance and radiation | |
6061 aluminum bar is non-toxic and can be used in food preparation equipment. Aluminum's reflective nature is suitable for light fixtures, is non-combustible and so does not burn. Some end uses include transportation, food packaging, furniture, electrical applications, building, construction, machinery and equipment.
Aluminum bar can be used for a variety of applications, including:
- Medical assembly
- Aircraft construction
- Structural components
- Commercial transportation
- Electrical Components
Note:
1.Free sampling, 100% after-sales quality assurance, Support any payment method;
2.All other specifications of round carbon steel pipes are available according to your requirement (OEM&ODM)! Factory price you will get from ROYAL GROUP.
Process of production
The production process of martensitic stainless steel is as follows: hot rolling roil - annealing - alkali immersion - rinsing - pickling - coating - wire drawing - decoating - finished product inspection - packaging
Austenitic stainless steel wire production process: hot rolling coil - solution treatment - alkali immersion - rinsing - pickling - coating - wire drawing - decoating - neutralization - finished product inspection - packaging
product Inspection
3003 aluminum bar is a commonly used manufacturing material and is widely used. In order to ensure the quality of aluminum products, it is necessary to test the quality of aluminum rods. Below we will introduce the quality inspection standards of aluminum rods.
1. Appearance requirements: aluminum alloy bar should have no cracks, bubbles, inclusions, defects and other defects. The surface should be flat, with a good finish and no obvious scratches allowed.
2. Size requirements: the diameter, length, curvature and other dimensions of the aluminum rod should meet the standard. Diameter tolerance and length tolerance should not exceed the national standards.
3. Chemical composition requirements: The chemical composition of the aluminum bar should meet the standards stipulated by the state, and the standard chemical composition should be consistent with the chemical composition of the trust in the aluminum rod quality inspection certificate.
1. Appearance detection method: Place the aluminum rod under the light source and observe whether there are defects and scratches on the surface.
2. Size detection method: The diameter measuring instrument and the length measuring instrument are used to measure the aluminum rod. The measurement of curvature should be carried out on special testing equipment.
3. Chemical composition detection method: The method of chemical analysis is used to detect the aluminum rod.
Packaging is generally naked, steel wire binding, very strong.
If you have special requirements, you can use rust proof packaging, and more beautiful.
Transportation: Express (Sample Delivery), Air, Rail, Land, Sea shipping (FCL or LCL or Bulk)
1: What alloys are produced?
Mostly 6061 6063 2024 7075; 5052 5083 1050 1100 also are available.
2: What diameter range?
Diameter from φ3mm to φ500mm.
3: What are the standard lengths?
Standard lengths 2m,3m,6m. Custom cut lengths available.
4: What are the tolerances?
Comply with ASTM B221, EN 485, GB/T 4437. H9/H11 cold drawn bars.
5: What surface finishes?
Mill finish,pollished,anodized,sandblasted, brushed.
6: Main applications?
Machining /automation /aerospace /automotive /construction /marine /hardware /engineering.
