page_banner

Malaysia Z-Type Steel Sheet Pile: Complete Technical Parameters & Local Adaptation Guide

Malaysia's booming construction industry—from expansion projects in Penang and Port Klang to coastal protection works in Sabah and deep foundation construction for skyscrapers in Kuala Lumpur—has led engineers to consider Z-shaped sheet piles as a preferred option. Their unique Z-shaped cross-section, excellent mechanical properties, and cost-effectiveness perfectly suit Malaysia's complex geological conditions (multi-layered soft soil structures, high tides) and national building codes. This guide highlights key technical parameters, localized applications, and real-world project examples, serving as a reference for design, material procurement, and construction.

z type steel sheet pile (2)
z type steel sheet pile (1)

Executive Standards: Local & International Compliance

Royal Steel Group's Z-type sheet piles supplied to Malaysia fully comply with global and local standards, ensuring safety, durability, and project approval:

- International Standard: EN 10248-2:2024 (Hot-rolled steel sheet piles), specifying dimensional tolerances, straightness, and quality to ensure consistent quality.

- Malaysian Standard: Complies with MS EN 1993, JKR 2020 Standard Code for Building Works, and Section 10 (Pile Foundations) of Road Works, meeting the requirements of both government and private projects.

- Certification: CIDB certified, compliant with RoHS/REACH regulations, suitable for environmentally sensitive coastal and wetland projects in Malaysia.

Core Technical Parameters (Malaysia-Specific AZ Series)

Royal Steel’s hot-rolled AZ series Z-type piles are tailored to Malaysia’s engineering needs (deep foundations, coastal reclamation, ports). Key parameters (metric system, aligned with local habits) are shown below:

Model (AZ Series) Cross-Section Width (mm) Cross-Section Height (mm) Weight per Meter (kg/m) Moment of Inertia (cm⁴/m) Elastic Section Modulus (cm³/m) Length Range (m)
AZ13-770 770 345 79.5 22360 1300 6-12
AZ26-700 700 460 102.9 59720 2600 6-18
AZ38-700N 700 499 126.4 89610 3795 9-18
AZ46-700N 700 501 157.7 110150 4405 12-24
Get detailed dimensions and a quote

Key Parameter Highlights for Malaysia

Cross-Section: 700-770mm width reduces pile quantity per meter, speeding up construction (critical for tight-schedule port projects). 345-501mm height balances strength and cost for deep foundations (>15m).

Weight: 79.5-157.7kg/m suits local transportation/hoisting. AZ13-770 for temporary urban support; AZ46-700N for high-load coastal reclamation.

Bending Resistance: AZ38-700N/AZ46-700N’s high moment of inertia (89610-110150 cm⁴/m) resists soft soil and tidal pressure—ideal for coastal projects.

Length: 6-24m covers most needs; custom splicing complies with JKR standards for special projects.

Material Parameters: Adapted to Malaysia’s Climate

Malaysia’s hot, humid and coastal environment demands high corrosion resistance. Royal Steel’s Z-type piles use high-quality structural steel with these key specs:

Grade: S355GP/S355J2W weathering steel (yield ≥355MPa, tensile 470-630MPa, elongation ≥21%) for durability in harsh conditions.

Corrosion Protection: Hot-dip galvanizing (Zn ≥80μm) or epoxy coating (≥200μm) extends service life to 50+ years in coastal areas—doubling ordinary piles’ lifespan.

Mechanical Strength: Impact energy ≥34J (-20℃) prevents brittle fracture during transport/installation, meeting JKR stress requirements.

Local Project Cases: Z-Type Piles in Action

Actual projects in Malaysia fully demonstrate the outstanding results achieved by our Z-type steel sheet piles:

Penang Port Expansion Project: AZ38-700N piles (12-18 meters in length, moment of inertia 89610 cm⁴/m) were used to support the deep foundation of the wharf. Their high bending strength can withstand strong tidal forces and soft soil pressure, and compared to U-type piles, the construction period was shortened by 15%. Compliance with Public Works Department (JKR) standards ensured smooth project approval.

Sutera Bay Reclamation Project, Sabah: AZ46-700N piles (157.7 kg/m, epoxy coating) were used for coastal reclamation. Their high-strength design and corrosion protection withstand salt spray and frequent tidal changes, reducing maintenance costs by 40% over five years. Custom-made 20-meter-long spliced ​​piles met the project's deep-water requirements.

Kuala Lumpur High-Rise Building Foundations: AZ13-770 piles (6-10 meters) were used for temporary foundation pit support. Its lightweight design (79.5 kg/m) simplifies hoisting operations in urban areas, while its section modulus of 1300 cubic centimeters/m ensures structural stability in soft urban soil.

Royal Steel’s Z-type steel sheet piles combine standardized parameters, local compliance and real project-proven performance—ideal for Malaysia’s infrastructure projects. Our local technical team provides on-site guidance for parameter selection, installation and maintenance.

Contact Royal Steel Group today for a detailed technical manual and customized Z-type steel sheet pile quotation tailored to your Malaysian project.

ROYAL GROUP

Address

Kangsheng development industry zone,
Wuqing district, Tianjin city, China.

E-mail

sales01@royalsteelgroup.com

Phone

Sales Manager: +8613652091506

Hours

Monday-Sunday: 24-hour Service

Post time: Apr-09-2026